Specifications:
|
CPU
Support: Socket 478
|
|
Intel Pentium 4 in the 478 pin package
with 400MHz FSB
|
Chipsets:
SiS 650
|
(North) SiS650
Supports Intel R Pentium 4 processor system bus at 100 MHz (400 MHz Data
Bus)
Support DDR200/266 DDR SDRAM interface
Support AGP interface
Support 533MB/s MuTIOL Connect to SiS961
Support ACPI 1.0b compliant power management
Support APM 1.2 compliant power management
(South) SiS961
Support UDMA 33/66/100 IDE interface
Support USB1.1 interface
Support ACPI 1.0b compliant power management
Integrated Real Time Clock (RTC) with 256B CMOS SRAM
Supports PCI interface
|
Form
Factor:
|
Flex ATX
|
Memory
|
2 x 184 pin DDR SDRAM
Socket
Support DDR200/266 un-buffer DDR SDRAM up to 2GB capacity
|
VGA:Build
in SiS 650
|
AGP v2.0 Compliant
Built-in a high performance 256-bit 3D engine
Built-in GDI+ Accelerator
Built-in programmable 24-bit true-color RAMDAC up to 333 MHz pixel clock
|
AudioC-Media
8738-PCI-6CH/LX
|
Support 5.1 speakers,
C3DX positional audio in 6 CH speaker mode
HRTF-3D positional audio, supporting Direct Sound 3D and A3D interface
Legacy SBPRO compatible
|
IEEE
1394a :Lucent FW323
|
1394a OHCI link and PHY
in single package
Complies with 1394 OHCI specification revision 1.0
Provides three fully compliant cable ports
Support 400Mb/s, 200Mb/s, 100Mb/s data transfer rate
|
Ethernet:Realtek
8100B
|
IEEE 802.3u 100Base-T
specifications compliant
10 Mb/s and 100 Mb/s operation
Supports Wake-On-LAN function
|
TV-Out
Function:SiS301
|
Supports PAL and NTSC
Systems
Supports Composite, S-Video, and Component R/G/B Output Signals.
Supports maximum input active resolution at PAL and NTSC system to
800x600.
|
Expansion
Slot:2 x PCI slots
|
PCI 2.2 compliant,
32-bit BUS Master Slots
133 Mbyte / sec maximum throughput
|
LPC
I/O:ITE 8705F
|
|
Comply with Intel Low Pin Count
Interface Specification Rev. 1.0
ACPI V. 1.0 compliant
Built in H/W monitor feature
Two 16C550 UARTs
Supports two standard Serial Ports
Floppy Disk Controller
Supports two 360K/ 720K/ 1.2M/ 1.44M/ 2.88M floppy disk drives
Enhanced digital data separator
3-Mode drives supported
Keyboard Controller
Support power-failure resume and power button de-bounce
|
H/W
Monitor: Built in ITE 8705F
|
2 thermal inputs from
remote thermal resistor to monitor system temperature
1 thermal inputs from thermal diode to monitor CPU temperature
8 voltage monitor inputs
1 chassis intrusion input
Monitors 3 fan tachometer inputs
Smart Guardian Controller to provide programmable fan speed automatic
control
|
IDE
interface:
|
2 x UltraDMA/100 IDE
Channels Master from SiS961
80-pin Cable Backward Compatible Legacy ATAPI Devices
ATAPI IDE CD-ROM, CD-R, CD-RW, and LS-120 Supports
|
Power
Management
|
|
APM 1.2 compliant
ACPI 1.0 compliant
Support multiple system suspend types- suspend to DRAM, suspend to disk,
and all with hardware automatic wake-up
|
BIOS:
Award PnP BIOS
|
Stored in 2 Mb LPC flash
memory
DMI 2.3
Bootable from Floppy, ATAPI device, USB device, SCSI device
|
On
Board Ports / Connectors / Jumpers (front/back panel)
|
Front Panel
2 x USB ports
1 x 1394 ports
1 x Mic-In
1 x Speaker-Out
Power-On
Reset
1 x 3.5" bay
1 x 5.25" bay
Back Panel Ports and Connectors
1 x PS/2 Keyboard
1 x PS/2 Mouse
1 x VGA port
2 x Serial Port
3 x 1394 ports
1 x S-Video connector
2 x USB ports
1 x RJ45 port
1 x line-in connector
1 x line-out connector
1 x Center/Bass connector
|
Other
connectors and jumpers
|
3 x fan connectors
1 x ATX power connector
1 x 4 pin 12V ATX power connector
Clear CMOS
|
Headers
|
1 x COM port header
1 sets of 2 x5 pin Front Panel USB header
1 sets of 2 x5 pin Front Panel IEEE1394a header
CD_In header
Microphone_In header
Speaker_Out header
|
Dimension
/ Material
|
|
200(w) x 181(h) x 280(d) mm
Aluminum
|
Power
|
|
Dimension:
82(w) x 43(h) x 190(d) mm
Basic Requirement:
| Rail |
Min |
Max |
Peak |
| 12V |
2A |
10A |
13A |
| 5V |
0.5A |
9.5A |
(note) |
| 3.3V |
1A |
14.5A |
(note) |
| -12V |
0 |
0.3A |
|
| 5VSB |
0 |
2A |
3A |
Outlet:
20pin ATX style X1: 15 cm
4 Pin: 10 cm
4 Pin + Smaller 4 Pin: 20 cm + 10 cm
4 Pin + Smaller 4 Pin + 4 Pin: 55 cm + 12 cm +12 cm
Input:
110/220 auto or manual switchable - without PFC
220 only - with PFC
Power Cord: depends on individual
region demand
|
Accessory:CD-ROM
Disk:
|
|
CPU Cooler
SS50 Install Guide
FS50 User manual
FS50 CD-ROM Disk:
a. SIS IDE Driver
b. SIS AGP driver
c. CMEDIA Audio driver
d. CMEDIA Audio Utility
e. ITE Smart Guardian Utility
f. User manuals in PDF format
Accessory Box
a. 1 x 21cm ATA 100/66 cable
b. 1 x 55cm ATA 100/66 cable (bend 90° from M/B side)
c. 1 x 32cm Floppy cable (bend 90° at 16.5 cm from M/B side)
|
