|
PowerLeap PL-iP3/T
adaptor + Celeron 1.2G
Overclocker 29 Dec 2001
Intel users will never forget about how rock
stable their BX chipsets Slot 1 boards are. The time has come that everyone is
moving to the Pentium 4. So, have you ever wonder if it is time to upgrade your
PC to the Gig hertz level by introducing a Tualatin or Celeron onto your
mainboard? Well, the problem is that it's not as simple as that because the new
CPU will not function with your existing Slot 1 adaptor. Slot 1 users you are in
luck as this adaptor allows you to use Tualatin on your BX board. Users of
Dual Pentium III Slot 1 boards, you will also be delighted to as you can now
upgrade your dual Pentium-S without changing your current Dual Slot 1 board. (*not all
boards are compatible).
The PowerLeap™ PL-iP3/T™ is a new and
unique upgrade solution for Slot-1 Pentium-II and Pentium-III systems. The
PL-iP3/T™ uses PowerLeap's patented IPS™ technology to adapt existing Slot 1
motherboards and systems to the voltage and GTL signal requirements of the new
generation of Intel's "Tualatin" Pentium III and Celeron-II (FC-PGA2)
processors. With the PL-iP3/T™, a typical* P-III system can reach speeds
up to 1.26 GHz with the latest Pentium III-S CPUs (133 MHz FSB required), and up
to 1.2 GHz when used with the latest Celeron-II "Tualatin" CPUs (100
MHz FSB required for 1.2 GHz core speed).
Special Features
- Supports the latest .13 micron Intel
"Tualatin" processors, including the 1.2 GHz Celeron with 256K L2
cache and Data Prefetch Logic.
- Auto-configures the CPU voltage and
frontside bus (manual FSB setting available).
- Supports the "Tualatin" 1.475
VCORE requirement even on motherboards that don't (see list at left).
- Integrated high-capacity switching VRM.
- Meets Voltage Regulator Module (VRM)
specifications 8.5, 8.4, 8.3, 8.2, and 8.1.
- Patented Independent Power Source (IPS™)
technology bypasses motherboard's VRM.
- Power-on LED.
- On-board cooling fan power connector.
- Includes a removable retention cartridge.
- Update: Now supports
dual-processing (SMP) for the Pentium-III-S processor!
-
Boards
that are compatible
-
Abit BE6-II versions 1.2, 2.0
-
Abit
BF6
-
Abit
BH6
Abit BX6 2.0
Abit VA6
Aopen AX6B
Aopen AX6BC
Asus P3B-F
Asus P3C-D
Asus P3C-E
Asus P3133
Asus P3V4X
BioStar M6TBA v. 1.5
BioStar M6TBC
BioStar M6TZF
Compaq Presario 5695 (requires latest BIOS)
Dell Dimension V
Dell Dimension XPS-H
Dell Dimension XPS-T
-
Dell
Dimension XPS-R (Read Review Here)
Dell Optiplex GX1 (A07 BIOS)
Dell Optiplex GX1P (A07 BIOS)
DTK PRM-0084I VBX
Epox EP-BX6/SE
Fujitsu M65E
Gateway GP6-350
Gateway GP6-400
Gateway Performance 500
Gateway Performance 750
GVC/BCM QS440BX (upgrade BIOS here)
Hewlett Packard Kayak XM600 (Dual)
Hewlett Packard Pavilion
IBM
PC 300PL 6862-27U
IBM PC 300PL 6862-N8U (read review here)
-
Intel
SE440BX
Intel SE440BX-2
Intel SE440BX-3
Micron Millennia Max GS
-
MSI
BX+
MSI BX Master
-
MSI
6163
MSI 845 Pro 2
Shuttle HOT-661V
Sony Vaio PCV-S710
Soyo sy6ba+iv
Tekram P6BXA rev. 1.01
Toshiba Equium 7450S2
Tyan S1854
Confirmed to be Incompatible:
Asus P2B series
FIC KA11 (but OK w/Celeron-II 1.1 GHz)
Gigabyte GA-6BXC (BIOS hang-up)
Supermicro P6DBS
Next
|
